Maximum ROP Before Fracture Formation

In this topic, we will apply the effective mud density formula to determine maximum ROP before fracturing formation.

Image may be NSFW.
Clik here to view.Figure 1 – Max ROP before Fracturing Formation

These two equations that will be used to determine the maximum ROP are listed below;

Effective mud density due to cuttings in the hole can be determined by the empirical equation below;

Image may be NSFW.
Clik here to view.

Where;

ρ_eff is effective mud density in ppg.

ρ_m is mud density in ppg.

Q is flow rate in gpm.

ROP is rate of penetration in fph.

d_b is wellbore diameter or bit diameter in inch.

 Equivalent Circulating Density (ECD) consists of three components given by the equation below;

Equivalent Circulating Density (ECD) = ρ_{m +} ρ_{c +} ρ_a — Equation 2

Where;

ρ_m is mud density in ppg.

ρ_c is cutting density in ppg.

ρ_a is annular pressure loss in ppg.

How To Apply These Two Concepts

Formation will be fractured if the ECD while drilling is more than fracture gradient. Additionally, besides mud weight (ρ_m), cutting density and annular pressure loss due to hydraulic contributes to ECD.

The ECD can be described in term of effective density and annular pressure as listed below;

Equivalent Circulating Density (ECD) = ρ_{m +} ρ_{c +} ρ_a — Equation 2

ρ_{eff  =} ρ_{m +} ρ_c — Equation 3

Equivalent Circulating Density (ECD) = ρ_eff + ρ_a  — Equation 4

Equivalent Circulating Density (ECD) = Fracture Gradient (FG) — Equation 5

With those relationships above, we can derive the maximum ROP into the following formulas.

Image may be NSFW.
Clik here to view.

Example – Determine the maximum ROP for this well.

Image may be NSFW.
Clik here to view.

Figure 2 – Well Information

Leak off test at shoe is 12.5 ppg.

The well was drilled to 9,500’MD/9,500’TVD

Mud weight is 10.5 ppg.

Annular pressure loss is 600 psi.

Flow rate is 800 gpm.

Hole size is 12.25”.

Solution

ECD should not exceed the leak off test value; therefore ECD is equal to 12.5 ppg.

Annular pressure loss (ρ_a) = 600 ÷ (0.052 x 9,500) = 1.21 ppg

Image may be NSFW.
Clik here to view.

Max ROP = 647.2 fph

Reference book => Image may be NSFW.
Clik here to view.Formulas and Calculations for Drilling Operations